How to Clean Carpet Spills and Spots

When you have a carpet installed in your home, then the biggest problem that you’ll have with it has something to do with cleaning. Regular vacuuming is already a chore. Much more if you have to deal with stains, spills, and spots. That makes your task twice as difficult.

There are things that you can do to keep your carpet clean and spotless without calling the professionals. But of course, when all the tips below fail, then you have no choice but to call the experts in carpet cleaning Oxford to help you out. Here are some of the things that you can do:

1. Blot and scrape the area.

If the stain is caused by a liquid, blot the area using a clean cloth. If it is caused by something solid and sticky, carefully scrape out the dirt before applying the cleaning solution. You have to blot as much liquid and scrape as much dirt as you can before doing anything else.

2. Test new carpet cleaning solutions on inconspicuous areas first.

If you’re going to use a new brand of carpet cleaning solution, it is best that you try it first on an inconspicuous area first. That way can test if it is going to affect the color of the carpet in a certain way. This should also be done if you’re using a carpet cleaning solution on your new carpet for the first time.

3. Never rub the spills.

The most common mistake of carpet cleaning is rubbing spills. If you rub the spills, the problem will only spread and the damage gets worse. Blotting and scraping are not the same as rubbing. You have to make sure that you’re not pushing the dirt right into the fiber of the carpet. The idea is to remove them from the carpet and not drive them further in.

4. Work the spot up from the outside to the inside.

When there’s a stain in your carpet and you’re using a spot cleaner, you have to blot it from the outside going to the inside. That’s how you can keep the problem from getting worse. Be sure to blot up all the moisture after you have applied the cleaning solution.

5. Always use a clean towel.

When cleaning your carpet, you have to always use a clean cloth or towel. That way, you don’t have to add more to the dirt in the carpet. Use a clean cloth when drying the moist area of the carpet. Brush the fibers upwards so that they dry faster.

6. Stack white towels over very wet carpet to absorb moisture.

Some spills from liquids make the carpet wet for quite some time. Stacking several clean towels over the area will help absorb the moisture. That way, they get dry easily. Weighing then down with books or other heavy objects will also help a lot.

These are the things that you can do to whenever you encounter spots or spills on your carpet. But then, you have to always remember that calling professional carpet cleaners is what you must do if none of these tips work.

Leave a Reply

Your email address will not be published. Required fields are marked *